2026 Year-End Tax Checklist for Idaho Business Owners
Year-end tax planning for an Idaho business comes down to a handful of decisions that have to be made by December 31, 2026: when to buy equipment, how much to pay yourself, which income and expenses to time, and which elections to make. Make them now and January is quiet. Wait, and the choices start making themselves.
Here’s what we tell owners every December. The real question isn’t “how do I lower my tax bill?” It’s “which of these decisions can I still make on purpose?” A calm hour of planning now buys you a holiday season that’s actually about the holidays.
At a glance
- December 31, 2026 falls on a Thursday. Purchases, payments and plan setups that depend on the calendar year need to be done by then.
- The 2025 federal tax law made 100% bonus depreciation permanent and raised the Section 179 limit to $2.5 million, with inflation indexing after 2025.
- S corporation owners should confirm their 2026 salary is reasonable before the last payroll of the year.
- Collect Form W-9s now. The 2026 Form 1099-NEC threshold is $2,000, and forms are due February 1, 2027.
What should Idaho business owners do before December 31?
Start with the decisions that change taxable income, then tidy up the records your return depends on. The table is the short version. Each item is explained below.
| # | Action | Deadline | Who it helps most |
|---|---|---|---|
| 1 | Review a year-end tax projection | Early December | Every profitable business |
| 2 | Time equipment purchases | Placed in service by Dec. 31 | Contractors, farms, manufacturers, practices |
| 3 | Set S corporation owner salary | Last 2026 payroll | S corporation owners |
| 4 | Time income and expenses | Dec. 31 | Cash-basis businesses |
| 5 | Review retirement plan options | Varies by plan type | Owners with steady profit |
| 6 | Decide on Idaho’s ABE election | With the 2026 return | Partnerships and S corporations |
| 7 | Collect W-9s and review contractor payments | Before January | Anyone who paid contractors |
| 8 | Count inventory and review job status | Dec. 31 | Retailers, manufacturers, contractors |
| 9 | Check fourth-quarter estimated payments | Mid-January 2027 | Owners with pass-through income |
| 10 | Close and reconcile the books | January 2027 | Every business |
1. Why start with a tax projection?
A projection shows where your 2026 taxable income is likely to land. That one number tells you whether to speed up deductions, push income into next year, or simply leave things alone. Without it, every year-end move is a guess.
The payoff isn’t just a smaller bill. It’s knowing. Owners who see their number in early December stop carrying the “am I going to owe a lot?” question around with them.
2. Should I buy equipment before year-end?
Buy equipment before year-end only if the business needs it, and the asset must be placed in service by December 31 to count for 2026. The 2025 federal tax law provides a permanent 100% first-year depreciation deduction for qualified property acquired after January 19, 2025, and raises the Section 179 expensing limit to $2,500,000, reduced once qualifying purchases exceed $4,000,000 (IRS).
A full write-off isn’t always the best answer, though. If 2026 income is low, or you expect higher income later, spreading the deduction out may save more over time. Idaho doesn’t always follow the federal depreciation rules, so check the state treatment before you buy. For industry detail, see Section 179 vs. bonus depreciation for farm equipment and for medical equipment.
3. Is my S corporation salary reasonable?
S corporation owners who work in the business must pay themselves a reasonable salary before taking distributions, and the year-end payroll is the last chance to adjust 2026 wages (IRS). Also confirm that health insurance paid for owners with more than 2% of the shares is included in their W-2 wages.
Getting this right now means you won’t be second-guessing it if the IRS ever asks. If you’re still an LLC taxed as a sole proprietorship and profit has grown, read LLC vs. S corp in Idaho before deciding whether to elect for 2027.
4. Should I delay income or speed up expenses?
Cash-basis businesses can sometimes shift taxable income by timing when they bill and when they pay. Paying deductible expenses in December, or sending invoices in January, can move income between years, as long as the timing reflects real business activity.
This works best when 2027 income is expected to be similar or lower. If you expect higher income or rates in 2027, the opposite may make sense. Accrual-basis businesses have less room to time income. Our guide to switching from cash to accrual accounting explains the difference.
5. Is it too late to set up a retirement plan?
Not always. Some plans must be set up before year-end to accept 2026 contributions, while others can be set up later, up to the tax return deadline. Employer contributions are generally deductible, and a good plan helps you keep the people you’ve worked hard to hire.
This is one of the few year-end moves that pays you twice: a deduction this year, and a little more freedom later. Ask your CPA which plan types still work for 2026 before December 31.
6. Should my business make Idaho’s ABE election?
Idaho’s affected business entity (ABE) election lets a partnership or S corporation pay Idaho income tax at the entity level, with owners receiving a credit against their own Idaho tax (Idaho State Tax Commission). It’s made year by year with the business return, so the 2026 decision happens when the return is filed.
Whether it helps depends on the owners’ situations, whether the business has losses, and how the federal deduction for state taxes applies to them. It’s worth modeling with your CPA before filing. Utah owners should also review the Utah pass-through entity tax election.
7. Am I ready to file 1099s?
Get ready now, because Form 1099-NEC is due to recipients and the IRS by February 1, 2027. For payments made in 2026, the general reporting threshold for Forms 1099-NEC and 1099-MISC rose from $600 to $2,000 (IRS instructions).
Before January:
- Request a Form W-9 from every contractor you paid this year
- Run a vendor report of 2026 payments by payee
- Separate payments made by card or payment app, which are reported on Form 1099-K by the processor, not by you
A few emails in December save a lot of chasing in late January. Our 1099-NEC filing guide for Idaho businesses walks through each step. If you’re unsure whether a worker is a contractor at all, read our update on employee vs. independent contractor rules.
8. Why count inventory and review jobs at year-end?
Inventory and work-in-progress numbers flow straight into cost of goods sold, so an accurate year-end count changes taxable income. Retailers and manufacturers should count inventory and write down obsolete stock. Contractors should update estimates to complete on open jobs so the WIP report reflects real progress.
Contractors have their own list. See year-end tax planning ideas for contractors.
9. Have I paid enough estimated tax?
Owners with pass-through income should compare 2026 payments and withholding to their projected tax before the fourth-quarter federal estimated payment, which is due in mid-January 2027. Underpaying can trigger a penalty even if you pay the balance in April. Our guide to quarterly estimated tax payments for Idaho self-employed owners covers the safe-harbor rules. The IRS explains the basics on its estimated taxes page.
10. What records should be closed by January?
Close and reconcile December so the return starts from clean numbers. That means reconciling every bank, card and loan account, booking depreciation and accruals, reviewing owner draws and distributions, and saving December statements.
Businesses on monthly client accounting services usually start tax season with this already done. That’s the real benefit of clean books: tax season stops being a season.
Frequently asked questions
What is the last day to make 2026 tax moves?
Most year-end moves for calendar-year businesses must happen by Thursday, December 31, 2026. Equipment must be placed in service, expenses paid, and certain retirement plans set up by that date. Some decisions, such as Idaho’s ABE election and certain retirement plan contributions, are made later with the 2026 return. Ask your CPA which deadline applies to each item.
Is bonus depreciation 100% for 2026?
Yes, for qualified property acquired after January 19, 2025. The 2025 federal tax law made the 100% first-year depreciation deduction permanent for that property. Whether to take it in full depends on your income this year and next, and Idaho’s treatment should be confirmed for state purposes.
What is the Section 179 limit for 2026?
The 2025 law raised the Section 179 expensing limit to $2,500,000 for property placed in service in tax years beginning after December 31, 2024. The limit phases down once total qualifying purchases exceed $4,000,000, and both amounts are indexed for inflation for tax years beginning after 2025, so the 2026 figures may be slightly higher.
Do I need to send 1099s for payments under $2,000?
For most Form 1099-NEC and 1099-MISC payments made in 2026, the reporting threshold is $2,000, up from $600. Some payments still have different thresholds, such as gross proceeds paid to an attorney. Keep W-9s on file for every contractor regardless of amount, since you may cross the threshold later in the year.
Should I prepay expenses in December to lower taxes?
Sometimes. Prepaying ordinary expenses can move deductions into 2026 for cash-basis businesses, but there are limits on how far ahead you can prepay, and the move only helps if 2026 income is taxed at a similar or higher rate than 2027. A projection shows whether it’s worth doing.
When should I schedule year-end planning with Cooper Norman?
As early in December as you can. Equipment purchases, payroll changes and retirement plan setups take time to arrange. Owners who meet in November or early December have the most options. By the last week of the year, the choices narrow.
Book your year-end review
You didn’t start a business to spend December thinking about depreciation schedules. Cooper Norman has helped Idaho and Utah owners close out the year since 1954, from offices in Idaho Falls, Pocatello, Blackfoot, Rexburg, Twin Falls and Pleasant Grove. Bring us your numbers. We’ll hand back a short list of moves worth making, and you can get back to the parts of the year you actually look forward to.
Learn more about our tax planning and advisory services.
Start a Conversation · New clients: (208) 551-5638
Last updated: December 2026. General information only, not tax advice for your specific situation.